Antminer APW3++ 1600w power supply
Note: This batch ships out witin 5 days upon receipt of payment. (first-order-first-paid.)
Note: Your order is only final after we confirmed it by sending the invoice.
Note: Order without VAT (0%) with a EU company VAT number or by ordering from outside EU
Note: Up to two years warranty instead of 180 days.
1. The power cord is not included, please find one with at least 10A from your local market.
2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
3. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer X3 miner.
4. Be sure to keep the original packing on hand when you get PSU, the original box should be used to return the PSU when you requesting RMA. Otherwise, it won’t be honored.
Specifications
|
Output |
DC Voltage |
12.15V |
|
Rated Current |
133A |
|
|
Rated Current |
100A |
|
|
Rated Power |
1600W |
|
|
Rated Power |
1200W |
|
|
Ripple & Noise |
<1% |
|
|
Voltage Regulation |
<2% |
|
|
Source Regulation |
<1% |
|
|
Load Regulation |
<1% |
|
|
Setup, Rise Time |
<2S |
|
|
Power off Protection Trip Time |
>9mS |
|
| Interface Type | 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors) | |
|
Noise Level |
<43DB |
|
|
Input |
Voltage Range |
100-240V AC |
|
Starting Voltage |
95-105V AC |
|
|
Frequency Range |
47-63Hz |
|
|
Power Factor |
>0.95 (full load) |
|
|
Leakage Current |
<1.5mA (220V 50Hz) |
|
|
Protection |
Low-voltage Input |
80-89V AC |
|
Output Short Circuit |
Yes |
|
|
Output Overcurrent |
134-185A max. |
|
|
Overheat Protection |
Yes |
|
|
Environment Conditions |
Operating Temperature |
-20°C – 50°C |
|
Operating Humidity |
20% – 90% relative humidity (non-condensing) |
|
|
Structure |
Dimensions |
220mm*108mm*62mm |
|
Cooling |
Fan |
Forced-air cooling |